A major company in the metallic materials and waste recovery field was searching for a submersible pump for effluents drainage from a natural pool, handling temperatures above 70°C.

Introducing a submersible pump into such high temperatures, plus the permanent contact with corrosive fluids usually causes breaks and premature wear, thus leading to reduced production time and a loss of revenue due to repairs.

In this situation, All Pumps Argentina, an Intrax company, recommended the use of a self-priming pump Toro E3, which offered a number of advantages.

Firstly, unlike a submersible pump, the E3 pump is not submerged in the pumped fluid, reducing its exposure.

It´s equipped with a standard motor without contact with the fluid, preventing burn out and ensuring greater safety during operation. As it is a standard motor, if replacement is necessary, it is readily available.

The self-priming feature of the pump allows it to draw in the fluid and eliminate the need for external priming.

Finally, the pump is designed with a mechanical seal in an oil bath which avoids the necessity of flushing.

Toro E provided an efficient and reliable pumping solution for the specific requirements of the application.

For any further information regarding this case study, call All Pumps Argentina on +54 0810-888-5544 or email [email protected]